Large Capacity Horizontal Decanter Centrifuge Oil Sludge Water Separator

Product Application

Decanter centrifuge is a mechanical equipment which utilize the principle of centrifugal and sedimentation and can carry out continual separate the suspend liquid with density difference.

The centrifuges which made by out factory can clarify, dehydrate and classify the suspensions with 0.002-3 mm solid-phase particles and thickness range at 0.5~40%. The product can be classify into two type LW-counter-current and parallel-current base on its structure feature.

According to feed feature, product can be divide into LW two-phase separator, LWS three-phase separator. It is suitable for separating different feed under different process condition, and widely use in pharmaceutical, food, chemical, light industry, environmental protection industry etc.

Main Features

• All parts coming into contact with the product are made of stainless steel.

• 3-phase AC motor for controlled torque starting via frequency converter

• Approximately 80 to 90 % of the oil is recovered.

• Low personnel costs due to continuous and automatic operation.

• Highest g-force for higher solids output

• Adjustable bowl speed via VFD

• Automatic adjustment of differential speed via VFD

• Two motor drive

• Belts for both primary motor and secondary motor

Advantages.

1. Lower cake transportation costs due to very dry solids

2. Better recovery of nutrients due to very high separation efficiency

3. Lower fresh water consumption compared to other processes

4. Continuous and fully automatic operation

5. 24 h operating reliability

6. Optimum wear protection

7. Energy saving design

8. Easy to operate

9. Easy to maintain

10. Simple assembly/dismantling

Application

1. Washing and dehydration of starch

2.Dehydration of soybean wheat proteins

3.Dehydration of fish meal and fish

4.Dehydration of brewers' grains

5.Purification of juice and dehydration of fruit fiber

6.Separation and purification of animal and vegetable oil

7.Separation and purification of coal tar

8.Clarification and purification of gypsum

9.Classification and dehydration of starch

10.Classification and dehydration of Kaolin and graphic

11.Classification and dehydration of dyes and pigments

12.Classification and dehydration of mineral thick liquid

Juneng Group

Juneng Group is a large scale manufacturer of industrial products in China. This group principally engaged with the in-house research & development as well as manufacturing of various industrial filters, separators , centrifuges and pumps.

The Company now has its three production bases with a total capacity of 280,000 square meters in Nanjing city and Yixing City , permanent workforces not less than 1100 people and the production line is well equipped with more than 2000 inits of advanced production equipment and test Instrumentation.

The Company is proud to be the leader in such industry with approximately 90% domestic market share in Oils & Fats industry, Chemical industry, Pharmaceutical industry, Beverage industry, Petrol-chemical industry, and now is one of the well-known producers and suppliers in World.

Not only selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and so on. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements

Engineering service on-site.

The company established a professional after-sales service technique troops, instructing and installing equipments are all free, helping to debug and be responsible for the training operation worker, until they master the technique( for domestic China). In the process of using these equipments, if problems are occurred, we will handle immediately ( for domestic China). We will try our best to promptly reply within 2 hours after informed, and arrange engineer to the site to solve the problems, he will not leave until you satisfied. The customer should in charge of all the abroad cost (include salary and other expenses).

Equipment packaging and transportation

According to the transportation situation of the user's place, the equipment can be packed in fully closed wooden boxes or sleepers fixed and naked. Drum, control cabinet and special tools must be packed in wooden boxes. The mode of transport is mutually agreed upon.